Medium grits such as 120 and 150 are useful for removing old finish or scratches. Fine-grit sandpaper helps seal off pores in the wood.
Finally finish sanding with a finer grit sandpaper such as 220 grit.
What sandpaper to use on wood table. When sanding sand the entire table with each grit before moving on to the next grit. Coarse grits those under 100 damage a fine wood finish. Use it for extremely rough surfaces when wood has dips gouges splinters or loose fibers.
Accessories include sanding drums disks and brushes. It polishes the table and creates a glassy smooth surface for the applications of stain and lacquer. Contoured sanding grips– You use one of these hard rubber grips by folding sandpaper around it and sanding along the grain of the wood.
However you may ask yourself which is better for your project the safest to use and the most cost-effective. Switch to finer grit sandpaper such as 120- or 240-grit on your sanding block or electric sander. Sand the table beginning with the coarsest-grit sandpaper 100 grit and sanding in the direction of the wood grain.
For example 60-grit sandpaper is the roughest sandpaper typically used on wood. Next use a medium grit sandpaper such a 120 grit or 150 grit to start to smooth the surface of the wood. Typically the only times to start with coarser sandpaper 80 or 100 grit are on boards with deep scratches or gouges or uneven joints after gluing.
When refurbishing furniture or other woodworking you have the choice to use a liquid sandpaperdeglosser or sandpaper to prep the item for painting or refinishing. Begin sanding the entire wood surface with coarse-grit sandpaper 80 grit then progress to medium-grit sandpaper 150 grit and then to a fine-grit sandpaper 220 grit before you stain. Sand the wood with fine-grit sandpaper to create a smooth surface.
When determining which grit best follows the one just used remember that the next grit should be no more than about 50 percent higher than the one before it. Coarse grits are recommended for rough sanding but it seldom pays to use paper coarser than 80-grit when sanding furniture. Primary sanding of rough wood and the removal of planning marks on wood is often best done with medium-grit sandpaper.
Silicon carbide paper is available in micro-grits from 220 to 1000. It removes wood fast. Sand with the grain over the whole piece again until it has an even smooth finish.
Fine grits such as 220 are frequently used for a final light sanding just before applying stain to the wood. 100 150 and 220 for example. Ultimately you want to make sure the wood surface feels smooth to the touch once complete.
Medium and fine grades of sandpaper are generally used in refinishing furniture and antiques. Fine sandpapers range from 120- to 220-grit. How To Refinish a Wood Table Move the table to a ventilated area like a covered porch or garage where you can work without worrying about the mess.
Contoured to fit exactly inside coves and around curved edges. Finish sanding with a fine grit sandpaper. Can alter the shape of delicate carvings quickly.
Use a medium grit sandpaper.