Dampen a soft lint-free cotton cloth with the solution and wipe the surface of the table to break down and remove the wax buildup. When removing melted wax from grooves or engravings on your wood table youll need to apply heat.
Never use a metal object to scrape wax off wood.
How do you remove wax from wood table. Set your hair dryer to medium and aim the heat at the wax until it begins to melt. Step 5 Dip a soft toothbrush into the soapy water and use it to remove old wax from any crevices. Use a dry rag to remove the gunk before rinsing the table.
You may first try to buff the piece of furniture and if you dont get visible results you can use a wax removal product. Work from the top of the piece of furniture rubbing the mixture in using small circles. There are two ways to remove wax from furniture depending on the degree of staining.
Do not under any circumstances chip away at the wax because you will likely damage the wood. Rinse off the table. Use a rag saturated with plain water to rinse the table.
The new layer of paste wax will soften the pre-existing layer. If you seek only to remove the wax but want to use the previous paint color as a priming agent then use paint thinner to cut the wax and then rinse with water or more of your TSP solution. By stripping to the wood the new paint will adhere better.
Rub the paste into the stain and wipe it off. For a more substantial mess gradually soften the wax with a hair dryer or clothing iron before wiping it off with a cloth. Soften dried wax with a blow dryer on medium heat.
Keep the blow dryer 3 to 4 inches away from the table. Repeat these steps as necessary until the wax has been removed. Hold the object at about a 45-degree angle to the wax and scrape away from you until all the wax is separated from the wood surface.
Dry the surface with a clean dry lint-free cloth after wiping it down to prevent moisture from damaging and staining the wood. Apply more of the soapy formula on your cloth and continue to work over the surface of the wood. Method 1 – Buff the Furniture.
To get rid of it make a paste with salt and water. The rag has to be lint-free. Rub a thin layer of paste wax over the surface of the wax you want to remove.
Let the wax melt then wipe away excess with a soft dry. First you may buff the surface of your piece using a soft cloth. To remove wax buildup in wood furnitures crevices dip a soft brush like an old toothbrush in the cleaning solution below and scrub rinse immediately and buff dry.
Replace the cloth with a new one as the wax buildup transfers to the cloth to prevent it from being redeposited onto the table. You only want enough to bind the salt together. To cut through both wax and underlying paint use a furniture stripper.
For a minor accident allow the wax to cool then gently scrape it off with a plastic utensil spatula or credit card. Wipe away the softened wax with a clean and dry microfiber cloth. If you act carefully you can remove the wax without scratching or gouging the table.
Follow the grain of the wood with each stroke. The easiest and safest way to remove wax from wood depends on the size of the spill. Add the water a couple of drops at a time.
Use any plastic object with a fine edge such as a credit card a plastic ruler or a plastic putty knife. Take a blow dryer and put it on medium heat. As you work the mineral spirits into the wood the old wax will transform into a black gunk.
Dust your furniture before attempting to remove wax buildup. This method will be especially useful if the paste wax is still wet or only recently dried.