An oilvarnish blend is ok but probably not the right finish for a heavily used table. Wax on wax off.
But with use the finish dulls.
Best wood finish for coffee table. It lacks the bold grain patterns of oak but its creamy consistency and glassy finish adds class to a coffee table. Wipe off any excess stain with a clean cloth then let the stain dry for as long as the instructions on the packaging recommend. Dont stop until you achieve perfection.
I would recomend 5-6 coats of a wiping varnish like Arm-R-Seal. Finally wipe the table down one last time with a dry cloth to remove any residual moisture. After the oil is dry apply 3-4 coats of the Waterlox one coat every 12 hours and let it dry for a week.
For a sprayed-on finish in a non-industrial setting the best is conversion varnish which also comes in two parts for you to mix before spraying. Sycamore properly cured and dry will finish much as any other hardwood. Alcott Hill Oyama Solid Wood Coffee Table.
If you are looking for a nice grain effect and a good easy to apply finish I would suggest 1 liberal coat of BLO boiled linseed oil applied with a brush and then wiped off twice at 15 minute intervals. This table comes in six colors and is constructed from solid pine so you dont have to worry about splitting or cracks. Apply a coat of the wood stain of your choice with a 4 in 10 cm paintbrush using long smooth strokes and going with the grain.
Its best to polish your coffee table about twice a year. For a brushed-on finish oil-based polyurethane is best. Wax as it turns out is a high-maintenance finish.
Your best bet would be varnish. In practice pure oil oilvarnish blends or even plain old wax are most commonly used due to their ease of application. If youre looking for a thicker finish that accentuates depth and fills the wood pores varnish shellac and lacquer are best.
Use it for the most durable table you can imagine. The coffee table starts to look tired. Ive tried clear and coloured wax and Danish oil on various woods and as far as I can see the best practical finish for a kitchen table is a polyurethane varnish unfashionable but practical.
Let this dry for 2-3 days. A classical stainsealertopcoat approach should be a good way to go. Beyond that and the sky is the limit.
Load a sanding block with 600-grit wetdry paper dribble on some soapy water and rub the finish smooth. The best thing about wood is its refreshing natural gloss. And skip the wax.
Wiping varnish also works well and provides a bit more protection. Simple elegant and traditional the Oyama Solid Wood Coffee Table is a great choice for tastes of all kinds. Arm-R-Seal Oil Based Topcoat is a tough long-lasting wood finish that comes in a can with a pry-off lid.
Stain the coffee table if you want a darker or different-colored wood finish. Well the sky and your skill levels of course. As one of the hardest domestic hardwoods maple ranks 1450 on the Janka scale.
Right behind conversion varnish in durability is catalyzed lacquer both one-part and two-part. This will leave you with a beautiful finish that protects the wood from the abuse it will most likely see. To remove these marks meant sanding away the hard cellulose finish and then re-applying it to blend in with the existing finish.
Then wipe the table dry look for flaws and rub some more. Smooth shaped edges with synthetic steel wool. You can buy it in a variety of sizes which can help reduce waste if youre refinishing a very small or very large kitchen table.
Secondly the tables still werent very well protected against staining so cup marks were still major problem. This finish is made with urethane resin which means that its extremely durable.