Apply a wood conditioner according to the directions on the package. You can finish tabletop in two ways.
When applied properly paste wax can add beauty to an old piece of furniture.
Best way to finish wood table top. Finish off with 1 coat of wood wax. It does not offer protection from heat but it protects the wood from moisture. Finally using a soft cotton rag or polishing pad buff the finish to a high shine using automotive paste wax photo below which has fine abrasives that polish the finish even further.
Sikkens makes a good marine grade varnish that can handle lots of abuse and the clarity is amazing. Let it set then buff the excess off. You can either spray the finish or brush it.
There are a couple scenarios where this works incredibly well and produces the beautiful aesthetic that people really want. The last thing a restaurateur wants is a table that has not been sealed that can collect food and debris creating an unsanitary condition. If youre looking to finish a kitchen table that gets regular use this Rust-Oleum product can be a great choice.
FInishing Reclaimed Wood – Sand the Surface After you remove the heavy dust from your prep stage its time for the finer stuff. Its designed specifically for heavy-use areas so its extra durable. Use your random orbit sander to sand the surface to a nice 220 grit finish.
Once you have the finish removed dab a pad of fine steel woolGrade 000in the stripper and rub the wood in the direction of the grain. Let it dry then wipe the rest off. Do this 1 to 2 more times.
The finish is made with urethane resin that ultimately leads to the extreme durability. General Finishes SGQT Arm-R Seal Urethane Topcoat It is both tough and long lasting wood finish. Here presenting the best finishes for wood kitchen table that are available.
You want the surface to be smooth but do not press too hard and grind into the wood. When finishing reclaimed wood tables for restaurants it is typical to make up a thin batch of epoxy and brush it on a rustic table top to help seal the small cracks. Follow up with 2 coats of wood butter using the same technique.
How to Finish a Wood Table Top with Polyurethane. Step 10 Do a Final Sanding by Hand. It works well over shellac for interior applications.
Paste waxes are usually made from Carnauba wax. Sand the scraps in exactly the same way you sand the table. This will remove any residual finish.
The first place this works well is in bars and coffee shops. Sand the table beginning with the coarsest-grit sandpaper 100 grit and sanding in the direction of the wood grain. Rub 1 coat of wood oil into the wood with a cotton rag.
Contributor M has a point though about wiping the waterlox. Sanding lighter or harder or using different grits will change the look of any finish you apply. Apply wood oil butter and wax if you want bring out the natural grain.
With the popularity of chalk and milk paint paste wax is becoming a popular way to finish wood. If your kitchen table has a beautiful wood grain this finish is one way to highlight it. It would be better to fine a nice 4 inch flat brush with short soft.
Apply paste wax with a cotton rag. After sanding you can apply the finish. The very best way to avoid wood finishers remorse is to test your finishes on wood scraps of the same wood species as your table.
Especially for barn wood tables. Finish With a Thin Coat of Epoxy This will be one of the most seen methods. Apply a small amount of automotive paste wax working in the grain direction to hide fine scratches.
Wipe the surface of the entire table using the tack cloth. Its designed to allow the grain to show through. Next sand the table with the 150-grit paper and finish by sanding with the 220-grit paper.
You have to sand the wood until it becomes scratch-free and smooth. You can not expect a perfect finish without sanding. But in both cases you need to sand the surface first.